Busch-Wächter ® BasicLine ABB
Busch-Wächter ® BasicLine (6800-0-2518) has a conical area and capture the mounting height is 2.5 m diameter circular area of about 7 m. The inner part of the sensitivity of the sensing characteristics of the above - there function corresponds to the presence of more sensors. The device finds application in traditional offices, administrative areas with low partitions separating, in meeting rooms, in classrooms, etc.
In addition to switch-off delay and threshold lighting is also an optional mode of operation. In automatic mode, the scanner works as usual. In semi-automatic mode switching is not automatic, but it waits for commands from the push-button controls connected between terminal 1 and the potential of L. off is automatic, or you can call at any time by pressing a button. The output element is a relay switching abilities 4 AX cos φ = 0.5 (2,000 watts for normal incandescent lamps in 1000 ° and for all halogen bulbs, 1000 VA fluorescent lamps with compensation for up to 100 F or 400 W for so . saving resources). For fitting in hollow ceilings spring mechanism is used, pre-marking holes allow for attachment to a standard container or other means.
Busch-Wächter ® BasicLine Corridor (6800-0-2519) has a larger capture area with a diameter of about 24 m, also with an inner cone with the inner sensitivity. It is designed for installation in the ceiling in large spaces such as corridors, underground garages, etc. For the efficient operation of the long delay in setting off the automatic recognition activates the passage: If the sensor records a relatively short movement, the output shuts down before it is dialed - approximately 2.5 min. For independent switching can use the contact button.
Internal relays can switch currents up to 4 AX cos φ = 0.5. The device is mounted in a standard box or mounted on the pad. Supplied with dust cover the bottom with 2 propichovacími bushings. The side of him perform two elastic metal strips for fastening the hollow ceiling. The device operates in a temperature range from -20 ° C to +45 ° C. Self-supplied surface mounting box (6800-0-2305) increases the degree of protection IP 54, making it possible to install and outdoors. For remote control of various functions can be used hand-held infrared transmitter (6800-0-2511). Protective guard (6800-0-2304) to prevent mechanical damage to the sensor.
Busch-Wächter BasicLine ® Mini (6800-0-2517) is mounted in a state of almost invisible - stands just 10 mm above the surface. It is ideal for installation in suspended ceilings in small rooms such as toilets. Scanning beam installation at 3 m in diameter covers an area of about 6 m. In addition to delay-off and threshold lights can also adjust the sensitivity of the shooting. Bottom round pick of the gigs in cable for connecting to switching units elongated. This can provléknout hole created by the scanning part. Switching characteristics are consistent with the above devices, push-button control is not possible.